Extruded EPDM sponge rubber cord for industrial
EPDM sponge rubber cord are extruded by material of EPDM sponge rubber, or other sponge material of Neoprene (CR), Nitrile (NBR), silicone etc. Cured in a series of microwave units to hold their finished form.
Closed cell soft rubber cord has a very important position in sealing systems, widely used on window, door, automotive, rail vehicle, windshield, electrical cabinet, solar energy etc.
According customer’s required make different shapes and sizes, such as sponge U profile, Sponge rubber cord, Sponge D profile, and other shaped sponge rubber sealing strips etc.
Auto car rubber cord also can be cut into specific length and vulcanized joint to a ring or a frame, or punch hole, or adhesive tape etc. According you required to do.
Material：EPDM, other material such as neoprene(CR), nitrile (NBR)，silicone sponge also can be do.
Tensile Strength: 2.8Mpa
Elongation at break: 200%
Density: 0.5 to 0.65g/cm3
Hardness: 10shoreA to 30shore A
Brittle temperature: -38°C
Color: black
Size: according your drawing or samples.
Package: 50m or 100m each roll
MOQ: 1000M
Hot joint or cold joint a ring, hot vulcanized a corner, cut to specific length, punch holes, print words, slip coat on rubber extrusions etc.
