Self-adhesive EPDM rubber seal for windows and doors

Self-adhesive windows doors rubber seal strip is made of high quality EPDM foam rubber with an acrylic adhesive layer on one side.

Used for thermal insulation of residential and industrial premises. The product is suitable for sealing all types of windows and doors including garage doors and windows.

The model is made of micro porous EPDM foam rubber with closed cells.

Foam epdm rubber seal strips back is coated with adhesive tape. The tape is highly resistant to weathering, UV radiation, oxygen, ozone and water. The sealant is used at temperatures from -40ºC to +65ºC with compression up to 40% of the primary value.

Shapes：D P E I

Size:
D shape seal strip size: 9×7.5mm, 9*6mm, 9*8.0mm, 10*12mm, 12*14mm. Sealing gap: 3.5-5.5mm
E shape seal strip size:9x4mm. Sealing gap: 2.5-3.5mm
P shape seal strip size:9×5.5mm. Sealing gap: 2.5-4.0mm
I shape seal strip size: 9x2mm. Sealing gap:1-2mm

Colors: Brown, black, white, gray

Easy to use.

Reduces energy costs for heating.

Possesses high adhesion to surfaces from a wood, metal, plastic.

Provides high-quality and durable gluing.

Fine-pored rubber is resistant to large temperature fluctuations.

The tape is windproof and does not absorb moisture.

Installation:

1. Installation of the seal must be carried out on a flat, clean, dry surface.

2. Do not allow moisture ingress.

3. Remove part of the protective strip from the adhesive layer of the seal. Carefully, for at least 5 seconds, press it to the surface of the product in the intended place.

4.Gradually removing the protective strip, install the seal on the product, pressing tightly, but in no case stretching it.

5. Fix the end of the seal, carefully for 3-5 seconds pressing against the product.

There are large stock for D P E I self adhesive rubber seal strips, welcome contact us!