High quality sliding window glass run channel suppliers
Sliding window glass run channel main material is EPDM, the reason is EPDM rubber not only with good weather, UV, ozone resistance, but also with excellent high and low temperature resistance, so EPDM material widely used on automotive sealing system.
Sliding glass run channel are usually made of polyamide or polyester fiber wool, and sometimes are mixed with polyamide and polyester fiber. The length of villi is 0.5-0.8mm and most of the villi are black.
The flocking process mainly consists of pretreatment, gluing, electrostatic flocking and curing. After curing, the adhesive strip will clean up the surface floating villi, and then cut it at a specific size, put it into packing box, and check it for storage, delivery or further packaging.
Glass run channel in the automotive seal strip system occupies a very important position, the rubber flocking seal strip in addition to the basic seal and reduce wind noise, but also provides guide rail and support for glass lifting.
Material: EPDM
Hardness: 65shore A to 80 shore A
Density: 1.35g/cm3
Elongation: 300%
Tensile Strength: >=7Mpa
Package: cut to specific length or according you required
MOQ: 1000M
