Vinyl Clad Weatherstrip for Doors From China Manufacturer & Supplier

Vinyl Clad Weatherstrip offers superior weather resistance and insulation, effectively sealing gaps around doors to prevent drafts, noise, and moisture infiltration. OMIT, a reputable manufacturer in China, specializes in high-quality weatherstripping solutions, using advanced technology and rigorous quality control to ensure optimal performance and durability.

Features of Vinyl Clad Weatherstrip for Door

  • Polyurethane (PU) foam core – high durability, superior recovery performance
  • Polyethylene (PE) film – weather and UV-resistant
  • Polypropylene (PP) &TPE insert – prevents elongation and shrinkage
vinyl clad foam door weatherstrip

OMIT’s Vinyl Clad Foam Door Weatherstrip Series

Descriptions of Vinyl Clad Door Weatherstrip

Experience the ultimate door seal with our high-performance vinyl clad foam weatherstripping for doors. This premium solution combines the durability of vinyl with the insulation benefits of foam, effectively blocking drafts, noise, and moisture for a comfortable and energy-efficient home.
The tough vinyl cladding resists abrasion and UV damage, ensuring long-lasting protection against the elements. The foam core creates a snug fit, eliminating gaps and preventing air leakage. This not only minimizes heat loss in winter and heat gain in summer, lowering your energy bills, but also dramatically reduces noise intrusion, creating a peaceful interior.
Our vinyl clad door weatherstrips are a versatile solution for a variety of door types, including entry doors, patio doors, and garage doors. It’s easy to install and comes in a range of colors to complement your existing décor. Choose this weatherstripping for enhanced comfort, energy savings, and a quieter, more comfortable home.

Advantages of Using Vinyl Clad Foam Door Weatherstrip

Heat preservation

keep cool or warm, the indoor temperature difference before and after sealing in winter is 3-6 degrees. Keep the room cool in summer

Dust proof

clean, after sealing, dust can no longer be seen on the windowsill, and it is protected from sand and dust attacks

Noise reduction

quiet, for users in downtown areas and near highways, the noise is reduced by 50%-70%

Power saving

For users with air conditioning, monthly power saving is 15%-20%

Money saving

The cost of sealing doors is one-tenth of redoing doors and windows

Windproof

100% sealed, after sealing, candle test, the flame does not flutter

Applications of Vinyl Clad Foam Door Weatherstrip

  • Entry Doors: Transform your entryway into a welcoming haven with our high-performance vinyl clad foam weatherstrips for entry doors. These weatherstrips are designed to withstand harsh weather conditions, effectively blocking drafts, rain, and noise, creating a comfortable and energy-efficient entry point for your home. They are easy to install, durable, and available in a range of colors to match your existing door.

  • Timber Doors: Enhance the beauty and functionality of your timber doors with our premium vinyl clad foam weatherstrips. Designed specifically for timber doors, these strips provide a superior seal against drafts, noise, and moisture, ensuring a warm, quiet, and comfortable interior. The durable vinyl cladding protects against wear and tear, while the foam core creates a snug fit, maximizing energy efficiency and preserving the natural beauty of your timber doors.

  • Internal Doors and Furniture: Create a quiet and comfortable environment in your home with our vinyl door weatherstrip, ideal for internal doors and furniture. These strips are designed to minimize noise transfer, ensuring a peaceful atmosphere in bedrooms, living spaces, and home offices. They can also be used to seal drawers and cabinets, preventing drafts and dust. Choose from a variety of colors to complement your interior design.

  • Aluminum Doors: Optimize the performance of your aluminum doors with our durable vinyl clad foam weatherstrips. These strips are specifically designed to seal gaps and prevent air leakage in aluminum doors, improving energy efficiency and reducing noise intrusion. The vinyl cladding offers long-lasting protection against the elements, while the foam core provides a snug fit, ensuring a comfortable and quiet interior.

  • UPVC Doors: Enjoy the benefits of a tighter seal and improved energy efficiency with our vinyl clad foam weatherstrips for UPVC doors. These weatherstrips are designed to provide a custom fit for UPVC doors, minimizing drafts, noise, and moisture infiltration. They are durable, easy to install, and available in a variety of colors to blend seamlessly with your existing UPVC doors.

How to Install Vinyl Clad Foam Door Weatherstrip?

  • Vinyl Clad Foam Door Weatherstrip: Choose the correct length and thickness for your door.
  • Measuring Tape: For accurate measurements.
  • Utility Knife: To cut the weatherstrip to size.
  • Cleaning Cloth: For preparing the door frame surface.
  • Adhesive: A strong weather-resistant adhesive specifically designed for weatherstripping.
  • Pencil: For marking the installation points.

  • Measure: Determine the length of the door frame where you’ll install the weatherstrip. Consider adding a little extra length for overlap at corners.
  • Clean: Thoroughly clean the door frame surface using a cleaning cloth and mild detergent. Remove any dirt, dust, or debris.
  • Mark: Use a pencil to mark the installation points on the door frame, ensuring the weatherstrip will be positioned correctly for a snug fit.

  • Cut to size: Using a utility knife, carefully cut the weatherstrip to the desired length.
  • Apply Adhesive: Apply a bead of adhesive along the marked area on the door frame, ensuring even coverage.
  • Position: Carefully place the weatherstrip over the adhesive, ensuring it is aligned correctly along the marked line.
  • Press firmly: Press down firmly along the entire length of the weatherstrip, ensuring a secure bond with the adhesive.
  • Allow to dry: Refer to the adhesive instructions for recommended drying time before using the door.

  • Measure: Measure the length of the corner sections where the weatherstrip will meet.
  • Cut and apply: Cut the vinly doot weatherstrip to the required length and install it using the same adhesive and pressing techniques as above. Ensure a smooth transition between the straight sections and corner sections for a tight seal.

  • Check for gaps: Once the adhesive has dried, inspect the weatherstrip for any gaps or loose areas. If necessary, re-apply adhesive or adjust the weatherstrip for a secure fit.
  • Clean up: Remove any excess adhesive or debris using a damp cloth.

Tips for Success:

  • Measure twice, cut once: Accurate measurements are crucial for a proper fit and prevent wasted material.

  • Use the right adhesive: Choose an adhesive specifically designed for weatherstripping to ensure a strong bond and weather resistance.

  • Apply pressure: Ensure a strong bond by pressing the weatherstrip firmly against the adhesive.

  • Clean and maintain: Regularly clean your weatherstrip to remove dirt and debris, maintaining its performance and longevity.

With a little care and attention, you can successfully install your vinyl clad door weatherstripping and enjoy the benefits of a well-sealed door for years to come.

Why Choose OMIT’s Vinyl Clad Foam Weatherstripping For Doors?

Choose OMIT for your wholesale vinyl clad door weatherstripping and experience the confidence of partnering with a trusted industry leader. We’ve been specializing in extruded rubber and plastic products for over 20 years, backed by a dedicated team of professionals and cutting-edge technology. Our commitment to quality is evident in our rigorous testing and certifications, like ISO9001:2015, ROHS, UL94-V0, and REACH. We are proud to offer a vast range of products, including vinyl clad foam door weatherstrip, manufactured in our state-of-the-art facility, ensuring consistent high-performance and durability. With our large inventory, efficient shipping, and personalized customer service, you can be confident in receiving your orders on time and exceeding your expectations.

  • Excellent memory – returns to original shape after long compression
  • Stability – low / no stretch gained by rigid insert or glass fibre internal cord
  • Easily compressed – low compression forces, unaffected by temperature variance
  • Sound proof – the PU foam sponge inside the coating film, also known as sound-absorbing cotton, can reduce 43-45 decibels of noise compared to ordinary rubber strips
  • Thermal insulation – energy-saving performance, reducing heat loss by 10%-15%
  • Non-toxic and odorless – does not react with paint cleaners
  • Stability – resistant to wear, aging, ultraviolet rays and water erosion
  • Colors – white, black, brown, grey, coffee, light yellow, ivory yellow, purple and many other options
  • Temperatures – wide operating range under extremely warm and cold weather conditions

Get In Touch

Ready to upgrade your door seals and experience the benefits of a quieter, more comfortable, and energy-efficient home? OMIT offers high-quality, wholesale vinyl clad foam door weatherstrip that will exceed your expectations. Our commitment to quality materials, competitive pricing, exceptional customer service, and sustainable practices makes us the ideal partner for your weatherstripping needs. Contact us today to discuss your project requirements and explore how our products can enhance your doors and your home.

Contact Form Demo (#3)